Investigating the Use of Hydrated Lime and Rice Husk Ash in the Stabilization of Silty Clay Soils. Case Study: Nakivubo Primary School in Kampala

dc.contributor.authorCaroline Tereza Aber
dc.date.accessioned2024-04-19T07:21:50Z
dc.date.available2024-04-19T07:21:50Z
dc.date.issued2024-04-17
dc.description.abstractThis study examines the engineering properties of silty clay soils and their improvement through stabilization with hydrated lime and rice husk ash (RHA). Initial findings show untreated silty clay has poor load-bearing capacity and high plasticity, unsuitable for subgrade applications. Chemical analysis confirms RHA meets ASTM C 618-2012 standards, with SiO2 + Fe2O3 + Al2O3 content exceeding 70%. Optimal stabilization with 4% lime and 8% RHA enhances soil properties: reducing plasticity index, increasing CBR from 8% to 35%, and surpassing UCS requirement (0.5 MPa). Lime-RHA treatment yields a Compression Index (Cc) of 0.23 and Recompression Index (Cr) of 0.06, improving load-bearing capacity. Soil shows suitability for stabilization with low free swell index (2.3%), negligible moisture, slightly alkaline pH, moderate density (1.52), and low electrical conductivity. Further RHA addition (12%) decreases CBR and UCS, emphasizing stabilizer balance. In conclusion, combined lime-RHA application offers a promising method for subgrade construction, enhancing soil strength, reducing water sensitivity, and potentially improving drainage.
dc.identifier.urihttps://hdl.handle.net/20.500.12311/1353
dc.language.isoen
dc.titleInvestigating the Use of Hydrated Lime and Rice Husk Ash in the Stabilization of Silty Clay Soils. Case Study: Nakivubo Primary School in Kampala
dc.typeDissertation
dcterms.publisherUganda Christian University

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
ABER C T_BSCEE_2024.pdf
Size:
38.72 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.98 KB
Format:
Item-specific license agreed upon to submission
Description: