Bachelor of Science in Civil and Environmental Engineering

Permanent URI for this collection

https://scholar.ucu.ac.ug/handle/20.500.12311/100

Browse

Browsing Bachelor of Science in Civil and Environmental Engineering by Author "Emmanuel Owino"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Investigating the Use of Wastewater Sludge-Based Fuels
    (2024-04-16) Emmanuel Owino
    This study examines the potential of wastewater sludge-based fuels through hydrothermal carbonisation, a process of converting biomass into carbonaceous material under elevated temperature and pressure in a closed system. The investigation aims to utilize wastewater sludge from the UCU Wastewater treatment plant as a biofuel, focusing on determining its properties as a suitable feedstock, optimizing process conditions for maximum hydrochar yield and briquette formation, evaluating the fuel characteristics of the resulting briquettes, and conducting a cost-benefit analysis. Proximate analysis, calorimetry, water boiling tests, and AHP analysis were employed. Optimal conditions were found at 230°C with 50% moisture content for 2 hours, yielding a heating value of 14.89 MJ/kg. Briquettes composed of 15% starch, 5% sand, and 80% hydrochar exhibited favourable properties, although reactor instability at high moisture content levels suggests the need for a stirred hydrothermal reactor. Further research to enhance briquette water resistance is recommended to improve durability for diverse applications.
  • Thumbnail Image
    Item
    Investigating the Use of Wastewater Sludge-Based Fuels
    (2024-04-17) Emmanuel Owino
    This study examines the potential of wastewater sludge-based fuels through hydrothermal carbonisation, a process of converting biomass into carbonaceous material under elevated temperature and pressure in a closed system. The investigation aims to utilize wastewater sludge from the UCU Wastewater treatment plant as a biofuel, focusing on determining its properties as a suitable feedstock, optimizing process conditions for maximum hydrochar yield and briquette formation, evaluating the fuel characteristics of the resulting briquettes, and conducting a cost- benefit analysis. Proximate analysis, calorimetry, water boiling tests, and AHP analysis were employed. Optimal conditions were found at 230°C with 50% moisture content for 2 hours, yielding a heating value of 14.89 MJ/kg. Briquettes composed of 15% starch, 5% sand, and 80% hydrochar exhibited favourable properties, although reactor instability at high moisture content levels suggests the need for a stirred hydrothermal reactor. Further research to enhance briquette water resistance is recommended to improve durability for diverse applications.